How to translate 'The Word' in your language?
Author |
Message |
csterg
Site Admin
Joined: Tue Aug 29, 2006 2:09 pm Posts: 8613 Location: Corfu, Greece
|
 How to translate 'The Word' in your language?
TW is translatable (theoretically) in every language (even in Unicode-only langs). There is no support for right-to-left alignment so if you translate in such a language (e.g. Arabic or Hebrew), not everything will be mirrored, but this is something usually 'acceptable'. Instructions1. Thank you for your interest, this is a great service you can offer! 2. Check that the language you want to translate to does not already exist!. Below is a list of languages currently being translated, progress status, etc. If you want to get in an unfinished (or half finished) translation, pls do so. If you want to help a translator (e.g. share work), please express your interest here. 3. Download and read the instructions here. Make sure you can undertake this project yourself. If you are not sure, ask for help on this forum or search for answers to your questions. 4. Before starting, post a new thread here to inform everyone that you are starting the translation so that no duplicate work is being done. 5. Install the latest version of TW by downloading from the main site. In the installation folder you will find the english.lng file. You should use the english.lng file as a template. Please, open it and verify that near the top you see the line version=3.0.0.xxx-x (the version here may not match exactly with the version of the program, but it will certainly be close enough). Language -> translatorGreek -> Manolis M. German -> Hartmut P. Dutch -> Halbe J. Portuguese -> Ericson S. Spanish INT -> Julio B. Spanish ES -> Ruben G. Arabic -> John Bulgarian -> Ognyan I. Chinese -> William H. Slovak -> Peter M. Italian -> Roberto L. Polish -> Darek D. Albanian -> Ilirian G. French -> Philippe C. Finnish -> Teijo Catalan -> Carles M. Hungarian -> Laszlo B. Thai -> Choat Sinhalese (Sri Lankan) -> Jude. P Koulango -> Lonnie P. Korean -> Jin Shin Version 2 translations with no support at this moment to be upgraded to ver. 3Latvian Romanian Tamil Costas
Last edited by csterg on Tue Jun 02, 2009 11:17 am, edited 4 times in total.
|
Sun Jan 25, 2009 8:43 pm |
|
 |
Ericson
Joined: Wed Aug 30, 2006 10:57 pm Posts: 51 Location: Brazil
|
 Brazilian Portuguese translation for TW3
Costas, where shall I post the (new) thread for the Brazilian Portuguese translation for TW3?
_________________ Ericson L. Silva. Brazil
|
Mon Feb 09, 2009 5:02 pm |
|
 |
csterg
Site Admin
Joined: Tue Aug 29, 2006 2:09 pm Posts: 8613 Location: Corfu, Greece
|
 Re: Brazilian Portuguese translation for TW3
Ericson wrote: Costas, where shall I post the (new) thread for the Brazilian Portuguese translation for TW3?
Just added a sticky thread for portuguese
|
Mon Feb 09, 2009 5:05 pm |
|
 |
evstevemd
Joined: Sun Jul 19, 2009 10:44 pm Posts: 8
|
 Re: How to translate 'The Word' in your language?
I'm considering to do labour of love for my Kiswahili speaking people. I will update once I have time. For now I have something at hand to do Thanks TW team. I'll join you soon! If anyone want to join me in that I will be glad to hear!
Let's pray for healthy that we will accomplish King's desire Amen!
_________________ Titus 2:11 For the grace of God that bringeth salvation hath appeared to all men,Teaching us that, denying ungodliness and worldly lusts, we should live soberly, righteously, and godly, in this present world
|
Sun Nov 29, 2009 3:18 pm |
|
 |
phcalle
Joined: Sun Jan 17, 2010 6:15 pm Posts: 4 Location: Toulon, France
|
 Re: How to translate 'The Word' in your language?
Hello, I upgraded to the last version of the Word 3.1.0.995 and I saw afterwards that the 'frechn.lng' I was working on no longer matched the new 'english.lng' . So I had to restart the work (I had only 5% done, hopefully it was not wery long) Does this means we have to do the translation again for every new version ? Or is there a better way ?
Regards Philippe
|
Mon Feb 01, 2010 3:52 pm |
|
 |
csterg
Site Admin
Joined: Tue Aug 29, 2006 2:09 pm Posts: 8613 Location: Corfu, Greece
|
 Re: How to translate 'The Word' in your language?
phcalle wrote: Hello, I upgraded to the last version of the Word 3.1.0.995 and I saw afterwards that the 'frechn.lng' I was working on no longer matched the new 'english.lng' . So I had to restart the work (I had only 5% done, hopefully it was not wery long) Does this means we have to do the translation again for every new version ? Or is there a better way ?
Regards Philippe Hello Philippe, of course not. You only need to add a few new entires (very few). What do you mean 'no longer matched'?
|
Mon Feb 01, 2010 4:27 pm |
|
 |
HartmutP
Joined: Wed Aug 30, 2006 10:42 pm Posts: 95 Location: Bischoffen, Germany
|
 Re: How to translate 'The Word' in your language?
Hi Costas,
can you please set some flag/information/email distribution/message within here, as soon as a new build changes/adds a line in the english.lng? Think this would help to stay inline.
thanks, hartmut
|
Mon Feb 01, 2010 6:09 pm |
|
 |
csterg
Site Admin
Joined: Tue Aug 29, 2006 2:09 pm Posts: 8613 Location: Corfu, Greece
|
 Re: How to translate 'The Word' in your language?
I have thought of that too. Do you refer to just sending a message that something was added? Or do you mean to also refer to messages that have been updated? Costas
|
Mon Feb 01, 2010 7:41 pm |
|
 |
Gert-Jan
Joined: Tue Apr 03, 2007 8:13 pm Posts: 203 Location: Netherlands
|
 Re: How to translate 'The Word' in your language?
phcalle wrote: I upgraded to the last version of the Word 3.1.0.995 and I saw afterwards that the 'french.lng' I was working on no longer matched the new 'english.lng I noticed the same for some entries in the Dutch language file: In Bible view options, the list with categories now remains English.
|
Tue Feb 02, 2010 12:09 am |
|
 |
csterg
Site Admin
Joined: Tue Aug 29, 2006 2:09 pm Posts: 8613 Location: Corfu, Greece
|
 Re: How to translate 'The Word' in your language?
Yes, this is an exception: this list there should be fixed, or else the english one is used. The reason is that the order changed, so you would get wrong entries....
|
Tue Feb 02, 2010 12:32 am |
|
 |
msm5e
Joined: Tue Jun 08, 2010 2:48 pm Posts: 2
|
 Re: How to translate 'The Word' in your language?
HI Everyone !!
I would like to know if anyone did and finished the translation of the program to french !!
I was going to start it, but if anyone already dit it, I don't want to reinvent the wheel!!
Merci!!
|
Wed Jun 09, 2010 2:42 pm |
|
 |
csterg
Site Admin
Joined: Tue Aug 29, 2006 2:09 pm Posts: 8613 Location: Corfu, Greece
|
 Re: How to translate 'The Word' in your language?
Hello Merci, unfortunately noone has done this yet. Please, PM me so i can give you the mail of the one that started it, but i have no idea if there is any progress, Costas
|
Wed Jun 09, 2010 2:49 pm |
|
 |
muridnya
Joined: Wed Oct 06, 2010 9:47 pm Posts: 1
|
 Re: How to translate 'The Word' in your language? INDONESIA
Hi, I thank Lord Jesus to find out TW and the people behind it! I am interested in translating TW into bahasa Indonesia. I want to start the project as soon as possible. I have downloaded the manual and ready to start  At the moment, I am also editing the existing translation that I found to have significant errors both in quantity and quality. Let us work for the glory of Lord Jesus! Be blessed,
|
Wed Oct 06, 2010 10:26 pm |
|
 |
csterg
Site Admin
Joined: Tue Aug 29, 2006 2:09 pm Posts: 8613 Location: Corfu, Greece
|
 Re: How to translate 'The Word' in your language?
This is great to know, thank you! Please, send me a PM or email with your full name and email so i can add you to the list of translators, Costas
|
Thu Oct 07, 2010 6:50 am |
|
 |
loyal
Joined: Tue Nov 30, 2010 9:50 am Posts: 3
|
 Any korean version work
Greetings, I just cam across this work. I been working on a html-javascript bible for 15 years now. There was nothing free that supported asian languages then. I thought I might look at how to do Korean as my wife is korean and I work part time with a korean church. So I have the resources! Korean sometimes is difficult to get working because its like Thai Consonat clustered with vowel. Does the word support korean? If I can figure out how to take html into the format I have about 1 gig of texts in n Thai Korean and English.
|
Wed Dec 01, 2010 8:37 am |
|
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|